Cisco Systems VR-561 manual Session protocol aal2, VR-605

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

session protocol aal2

session protocol aal2

To enter the voice-service-session configuration mode and specify AAL2 trunking on a Cisco MC3810 multiservice concentrator, use the session protocol aal2 command in voice-service configuration mode.

	session protocol aal2
Syntax Description	This command has no keywords or arguments.
Defaults	There is no default setting for this command.
Command Modes	Voice-service configuration
Command History	Release	Modification
	12.1(1)XA	This command was introduced on the Cisco MC3810 multiservice
		concentrator.
	12.1(2)T	This command was integrated into the 12.1(2)T release.
Usage Guidelines	This command applies to VoATM on the MC3810 multiservice concentrator.
	In the voice-service-session configuration mode for AAL2, you can configure only AAL2 features, such
	as call admission control and subcell multiplexing.
Examples	The following example shows how to access the voice-service-session configuration mode, beginning in
	global configuration mode:

voice service voatm session protocol aal2

Cisco IOS Voice, Video, Fax Command Reference

VR-605