Cisco IOS Voice, Video, and Fax Commands: R Through Sh

server trigger

In LCF submode, enter the following syntax:

server trigger lcf gkid priority server-id server-ipaddress server-port

In LRJ submode, enter the following syntax:

server trigger lrj gkid priority server-id server-ipaddress server-port

In LRQ submode, enter the following syntax:

server trigger lrq gkid priority server-id server-ipaddress server-port

In RRQ submode, enter the following syntax:

server trigger rrq gkid priority server-id server-ipaddress server-port

In URQ submode, enter the following syntax:

server trigger urq gkid priority server-id server-ipaddress server-port

The following options are available in all submodes:

info-only

Information only—no need to wait for acknowledgment.

 

 

shutdown

Enter this subcommand to temporarily disable a trigger. The gatekeeper does

 

not consult triggers in a shutdown state when determining what message to

 

forward.

 

 

The destination-infoargument is under the ARQ, LRQ, LCF, and LRJ submode and has the following options:

destination-info

Configure destination-infoto trigger one of the following conditions:

 

 

e164

Configure an E.164 pattern.

 

 

email-id

Configure an email ID.

 

h323-id

Configure an H.323 ID.

 

When configuring the e164 address option, the email-id option, or the h323-id

word

option above, the E.164 address can end in a trailing ‘., ‘s, or ‘*’.

 

 

The redirect-reasonargument is under the ARQ and LRQ submodes and has the following options:

redirect-reason

Configure a redirect-reasonto trigger on (range of 0 through 65535) with the

 

following reserved values:

 

 

0

Unknown reason.

 

 

1

Call forwarding busy or called DTE busy.

 

2

Call forwarded no reply.

 

Call deflection.

4

 

Called DTE out of order.

 

9

 

Call forwarding by the call DTE.

 

 

10

Call forwarding unconditionally.

 

15

 

 

 

Cisco IOS Voice, Video, Fax Command Reference

VR-598

Page 38
Image 38
Cisco Systems VR-561 manual VR-598