Cisco IOS Voice, Video, and Fax Commands: R Through Sh show ss7 sm set
VR-809
Cisco IOS Voice, Video, Fax Command Reference
show ss7 sm set
To display information about the SS7 failover timer, use the show ss7 sm set command in privileged
EXEC mode.
show ss7 sm set
Syntax Description There are no arguments or keywords.
Defaults There is no default.
Command Modes Privileged EXEC
Command History
Examples The following example shows how to display failover timer information; the failover timer is set to the
default of 3 seconds:
Router# show ss7 sm set
Session Manager Set
failover timer = 3 seconds
Related Commands
Release Modification
12.0(7)XR This command was introduced.
12.1(1)T This command was integrated into CiscoIOS
Release 12.1(1)T.
Command Description
ss7 set failover timer Specifies the amount of time that the Session Manager waits for the
session to recover before declaring the session inactive.
ss7 session Establishes a session.