Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show ss7 mtp2 variant
show ss7 mtp2 variant
To display information about the SS7 MTP 2 protocol variant, use the show ss7 mtp2 variant command in privileged EXEC mode.
show ss7 mtp2 variant [channel]
Syntax Description |
| channel | Specifies a channel from 0 through 3. |
|
|
|
|
Defaults |
| If you do not specify a channel, the command shows protocol information for channel 0. | |
Command Modes
Command History
Privileged EXEC
Release | Modification |
12.0(7)XR | This command was introduced. |
|
|
12.1(1)T | This command was integrated into Cisco IOS |
| Release 12.1(1)T. |
|
|
Usage Guidelines Each country specifies its own variant of SS7, and the Cisco SLT supports several variants of the MTP 2 protocol. The selected variant can affect the MTP 2 statistics displayed by various commands. The Cisco SLT support the following variants:
•Telcordia Technologies (formerly Bellcore)
•ITU
•NTT (Japan)
•TTC (Japan Telecom)
Each channel can be configured to any one of the protocol variants. When you change from one variant to another, for example from Bellcore to NTT, the MTP 2 parameters default to those specified by NTT. You can then change the defaults as required.
Examples | The following example shows how to display protocol variant information for channel 1: |
Router# show ss7 mtp2 variant 1
Protocol version for channel 1 is Bellcore
Cisco IOS Voice, Video, Fax Command Reference
