Cisco Systems VR-561

Cisco IOS Voice, Video, and Fax Commands: R Through Sh show gatekeeper gw-type-prefix

VR-727

Cisco IOS Voice, Video, Fax Command Reference

Table 4 1 describes the fields contained in the show gatekeeper gw-type-prefix sample output.

Table41 show gatekeeper gw-type-prefix Field Descriptions

Field Description

Prefix The technology prefix defined with the

gw-type-prefix command.

Zone sj-gk master gateway list A list of all the gateways registered to zone sj-gk with

the technology prefix, under which they are listed.

(This display shows that gateways sj-gw1, sj-gw2, and

sj-gw3 have registered in zone sj-gk with the

technology prefix 12#.)

Zone sj-gk prefix 408....... priority gateway

list(s) A list of prioritized gateways to handle calls to area

code 408.

Priority 10 Highest priority level. Gateways listed following

“Priority 10” are given the highest priority when

selecting a gateway to service calls to the specified

area code. (In this display, gateway sj-gw1 is given the

highest priority to handle calls to the 408 area code.)

Priority 5 Any gateway that does not have a priority level

assigned to it defaults to priority 5.

(out-of-resources) Indication that the displayed gateway has sent a

“low-in-resources” notification.

(Hopoff zone la-gk) Any call specifying this technology prefix should be

directed to hop off in the la-gk zone, no matter what the

area code of the called number is. (In this display, calls

specifying technology prefix 7# are always routed to

zone la-gk, regardless of the actual zone prefix in the

destination address.)

Zone la-gk master gateway list A list of all the gateways registered to la-gk with the

technology prefix under which they are listed. (This

display shows that gateways la-gw1 and la-gw2 have

registered in zone la-gk with the technology prefix 7#.

No priority lists are displayed here because none were

defined for zone la-gk.)

(Default gateway-technology) If no gateway-type prefix is specified in a called

number, then gateways registering with 12# are the

default type to be used for the call.

(Statically-configured gateways) Lists all IP addresses and port numbers of gateways

that are incapable of supplying technology-prefix

information when they register. This display shows

that when gateways 1.1.1.1:1720 and 2.2.2.2:1720