Cisco Systems VR-561 Server RLM, Server name-tagno server name-tag, Disabled RLM configuration

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

server (RLM)

server (RLM)

To identify an RLM server, use the server RLM configuration command. To remove the identification, use the no form of this command

server name-tagno server name-tag

Syntax Description	name-tag	Name to identify the server configuration so that multiple entries of server
		configuration can be entered.

Defaults

Command Modes

Command History

Disabled

RLM configuration

ReleaseModification

11.3(7) This command was introduced.

Usage Guidelines	Each server can have multiple entries of IP addresses or aliases.
Examples	The following example identifies the RLM server and defines the associated IP addresses:
	rlm group 1
	server r1-server
	link address 10.1.4.1 source Loopback1 weight 4
	link address 10.1.4.2 source Loopback2 weight 3

Cisco IOS Voice, Video, Fax Command Reference

VR-594