Cisco Systems VR-561 manual Show controllers rs366 slot port, VR-693

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show controllers rs366

show controllers rs366

To display information about the RS-366 video interface on the video dialing module (VDM), use the show controllers rs366 command in privileged EXEC mode.

show controllers rs366 slot port

Syntax Description	slot	Slot location of the VDM module. On the Cisco MC3810 multiservice
		concentrator, this value is either 1 or 2. If you do not enter the correct
		location, the command is rejected.
	port	Port location of the EIA/TIA-366 interface in the VDM module. On the
		Cisco MC3810 multiservice concentrator, this value is 0.
Defaults	No default behavior or values.

Command Modes

Command History

Privileged EXEC

Release	Modification
12.0(5)XK	This command was introduced for the Cisco MC3810 multiservice
	concentrator.
12.0(7)T	The command introduced in Cisco IOS Release 12.0(5)XK was
	integrated into Cisco IOS Release 12.0(7)T.

Examples	On a Cisco MC3810 multiservice concentrator, the following example displays information about the
	RS-366 controller:
	Router# show		controller rs366 0				1
	RS366:driver		is initialized			in slot 1, port 0:
	STATUS	STATE	LSR	LCR	ICSR	EXT	T1	T2	T3	T4	T5
	0x02	0x01	0x00	0x50	0xE0	0x00	5000	5000	5000	20000	10000

Dial	string:
121C

Table 33 describes the significant fields shown in the display.

Table 33 show controllers Field Descriptions

Field	Description
STATUS	Last interrupt status.
STATE	Current state of the state machine.
LSR	Line status register of the VDM.
LCR	Line control register of the VDM.

Cisco IOS Voice, Video, Fax Command Reference

VR-693