Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show csm
| Use the show csm voice command to display CSM statistics for a particular DSP channel. If the | |
| ||
| the identified DSP channel will be displayed. If no argument is specified, all CSM call statistics for all | |
| DSP channels will be displayed. |
|
| The following is sample output from the Cisco AS5300 universal access server for the show csm voice | |
Examples | ||
| command: |
|
| Router# show csm voice 2/4/4/0 |
|
| slot 2, dspm 4, dsp 4, dsp channel 0, | |
| slot 2, port 56, tone, device_status(0x0002): VDEV_STATUS_ACTIVE_CALL. | |
| csm_state(0x0406)=CSM_OC6_CONNECTED, csm_event_proc=0x600E2678, current call thru PRI line | |
| invalid_event_count=0, wdt_timeout_count=0 | |
| wdt_timestamp_started is not activated | |
| wait_for_dialing:False, wait_for_bchan:False | |
| pri_chnl=TDM_PRI_STREAM(s0, u0, c22), tdm_chnl=TDM_DSP_STREAM(s2, c27) | |
| dchan_idb_start_index=0, dchan_idb_index=0, call_id=0xA003, bchan_num=22 | |
| csm_event=CSM_EVENT_ISDN_CONNECTED, cause=0x0000 | |
| ring_no_answer=0, ic_failure=0, ic_complete=0 | |
| dial_failure=0, oc_failure=0, oc_complete=3 | |
| oc_busy=0, oc_no_dial_tone=0, oc_dial_timeout=0 | |
| remote_link_disc=0, stat_busyout=0 | |
| oobp_failure=0 |
|
| call_duration_started=00:06:53, call_duration_ended=00:00:00, total_call_duration=00:00:44 | |
| The calling party phone number | = 408 |
| The called party phone number | = 5271086 |
total_free_rbs_timeslot = 0, total_busy_rbs_timeslot = 0, total_dynamic_busy_rbs_timeslot = 0, total_static_busy_rbs_timeslot = 0,
total_sw56_rbs_timeslot = 0, total_sw56_rbs_static_bo_ts = 0,
total_free_isdn_channels = 21, total_busy_isdn_channels = 0,total_auto_busy_isdn_channels = 0,
min_free_device_threshold = 0
The following is sample output from the Cisco AS5800 for the show csm voice command:
Router# show csm voice 1/8/19
shelf 1, slot 8, port 19 VDEV_INFO:slot 8, port 19
vdev_status(0x00000401):VDEV_STATUS_ACTIVE_CALL.VDEV_STATUS_HASLOCK.
csm_state(0x00000406)=CSM_OC6_CONNECTED, csm_event_proc=0x60868B8C, current call thru PRI line
invalid_event_count=0, wdt_timeout_count=0 watchdog timer is not activated wait_for_bchan:False
pri_chnl=(T1 1/0/0:22), vdev_chnl=(s8, c19)
start_chan_p=0, chan_p=62436D58, call_id=0x800D, bchan_num=22 The calling party phone number =
The called party phone number = 7511
ring_no_answer=0, ic_failure=0, ic_complete=0 dial_failure=0, oc_failure=0, oc_complete=1 oc_busy=0, oc_no_dial_tone=0, oc_dial_timeout=0 remote_link_disc=0, busyout=0, modem_reset=0
call_duration_started=3d16h, call_duration_ended=00:00:00, total_call_duration=00:00:00
Cisco IOS Voice, Video, Fax Command Reference
