Sharp XG-P610X-N quick start Setting the Lamp Mode, Selecting the Lens Type, Info

Helpful Functions Set during Installation (“Options 2” menu)

2Setting the Lamp Mode

This function allows you to select the usage of the two lamps installed in the projector.

Selectable items	Description
Both Lamps	Both lamps are used for greater
	brightness.
Lamp 1 Only	The lamp 1 is used.
	When the lamp 1 burns out, the lamp 2
	automatically switches in use.
Lamp 2 Only	The lamp 2 is used.
	When the lamp 2 burns out, the lamp 1
	automatically switches in use.
Equal Use	Both lamps are used alternately for
	certain periods.

3Selecting the Lens Type

When you change the lens, you need to set the lens type. See the table below to select the lens type.

Selectable items	Attached lens
Type 1	AN-P8EX
Type 2	AN-P12EX
Type 3	AN-P15EZ
Type 4	AN-P18EZ
Type 5	AN-P23EZ
Type 6	AN-P30EZ
Type 7	AN-P45EZ

Info

•The Lens Shift, Keystone Correction, etc. may not properly function if the correct lens type is not se- lected.

Menu operation Page 47

4Reversing/Inverting Projected Images

This projector is equipped with a reverse/invert image function that allows you to reverse or in- vert the projected image for various applications.

Selectable items	Description
Front	Normal image
Ceiling + Front	Inverted image
Rear	Reversed image
Ceiling + Rear	Reversed and inverted image

Note

•This function is used for the reversed image and ceiling-mount setups. (See page 23.)

5Controlling Multiple Projectors with the One Remote Control

This function allows you to control multiple projectors with the one remote control during the stack projec- tion or the video wall projection. When using this func- tion, connect the projectors with LAN cables and as- sign a projector as the master and the other projectors as the slaves. See page 27 for connecting LAN cables.

Selectable items	Description
Normal	The stack setting is not available.
Master	Set the projector as the master.
Slave	Set the projector as the slave.

Note

•When “Lens Type” is changed, “GEOMETRIC ADJUSTMENT”, “H&V KEYSTONE” and “IM- AGE RESIZING” will be reset.

Note

•When controlling multiple projectors with the one remote control, settings via web browser are re- quired. Refer to the “SETUP MANUAL” contained on the supplied CD-ROM for details.

•Only when controlling two projectors with the one remote control, using “Pair Stack” allows you to skip settings via web browser. (See page 63.)

•When “Slave” is selected on “Stack Setting”, the slave pro- jector cannot be controlled with the remote control.

To control the slave projector with the remote control, con- nect the remote control to the projector. (See page 17.)

-62