Sharp XG-P610X Using the Remote Control as a Wireless Computer Mouse, Slide the ADJ./MOUSE

Using the Remote Control

Using the Remote Control as a Wireless Computer Mouse

When connecting the optional remote re- ceiver (AN-MR2) to the computer, you can use the remote control as the wireless com- puter mouse.

1Connect the optional remote re- ceiver to the USB terminal on the computer.

2 Slide the ADJ./MOUSE	ADJ.
switch on the remote con-
trol to the MOUSE position.	MOUSE

Computer

To USB terminal

Remote receiver

3Use the mouse function.

•Point the remote control at the remote receiver.

■When moving the cursor Press '/"/\/.

■When left-clickingPress L-CLICK.

■When right-clickingPress R-CLICK.

■When your computer supports only a one-click mouse (such as Macintosh®) Press L-CLICK or R-CLICK.(L-CLICK and R-CLICK have common function.)

Note

•This function only works with the Microsoft® Windows® OS and Mac OS®. However, this func- tion does not work with the following operation systems that do not support USB.

•Versions earlier than Windows® 95.

•Versions earlier than Windows® NT4.0.

•Versions earlier than Mac OS® 8.5.

•Confirm that the computer recognizes the USB connection.

•While the remote control is connected to the projector with a signal cable, you cannot use the wireless computer mouse function.

ADJ./MOUSE switch

Mouse/adjustment button ('/"/\/)

R-CLICK button

L-CLICK button

-18