Sharp XG-P610X quick start Correcting Trapezoidal Distortion, Selecting the Type of the Correction

Image Projection

Correcting Trapezoidal Distortion

When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally.

The function for correcting trapezoidal distortion is called Keystone Correction.

There are the two types of the Keystone Correction.

1)“GEOMETRIC ADJUSTMENT” for correcting an image designating the corner of the projected im- age

2)“H&V KEYSTONE” for designating the correction of the horizontal and vertical axes

Selecting the Type of the Correction

Select the type of the keystone correction.

Press KEYSTONE on the projector or on the remote control.

•“GEOMETRIC ADJUSTMENT” will be dis- played.

•Each time KEYSTONE is pressed, the display toggles as follows:

GEOMETRIC	→	H&V KEYSTONE
ADJUSTMENT		↑
↑
The display	←	IMAGE RESIZING *
disappears.
GEOMETRIC	For correcting an image desig-
ADJUSTMENT	nating the corner of the pro-
	jected image
H&V KEYSTONE	For correcting an image desig-
	nating the horizontal or vertical
	axes
IMAGE RESIZING	For correcting the image dis-
	tortion which cannot be cor-
	rected with “H&V KEY-
	STONE”.
	*Only when “H&V KEY-
	STONE” is set to the values
	other	than “0”, “IMAGE
	RESIZING” can be adjusted.
	(This function cannot be used
	when correcting with “GEO-
	METRIC ADJUSTMENT”.)

KEYSTONE button

Mouse/adjustment

button ('/"/\/)

ENTER button

UNDO button

KEYSTONE button

Adjustment

button ('/"/\/)

ENTER button UNDO button

-32