Sharp XG-P610X-N quick start Connecting the Projector to Other Equipment

Connecting the Projector to Other Equipment

Equipment	Terminal on connected equipment	Cable	Terminal on the projector
Video equipment,	S-video output terminal	S-video cable (commercially available)	S-VIDEO
Camera, Video game
	Audio output terminal	RCA audio cable (commercially available)
	Video output terminal	Video cable (commercially available)	VIDEO
	Audio output terminal	RCA audio cable (commercially available)
Monitor	RGB input terminal	RGB cable (supplied or commercially available)	MONITOR OUT

Amplifier

Audio output terminal ø3.5 mm stereo minijack to RCA audio cable (commercially available)

MONITOR OUT

Note

•When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable.

•Video signal for monitor output is analog RGB signal as well as component signal (COMPUTER1/2). DVI and HDMI input video signals would not be output.

•When the audio from HDMI input is directed to the MONITOR OUT (AUDIO) terminal, output will be generated as Linear PCM audio.

•HDMI (High-Definition Multimedia Interface) is a digital AV interface that can deliver a high-definition video signal, multi-channel audio signal, and bi-directional control signal all in just one cable.

•Because it is compatible with the HDCP (High-bandwidth Digital Content Protection) system, the digital video signal does not degrade when transmitted, and a high-quality image with a simple connection can be enjoyed.

•The HDMI terminal does not support the CEC signal.

This projector is able to process the following signals when connected to HDMI equipment:

•Video signal: For details, see “HDMI Support” in the list of “Computer Compatibility Chart” on page 75.

•Audio signal: Linear PCM audio

•Sampling frequency: 48kHz/44.1kHz/32kHz

-26