Using the Remote Control
Usable Range
The remote control can be used to control the projector within the ranges shown in the il- lustration.
Note
•The signal from the remote control can be re- flected off a screen for easy operation. How- ever, the effective distance of the signal may differ depending on the screen material.
Front View
Remote control sensor
Remote control |
|
signal transmitters | 23' (7 m) |
Remote control
Rear View
Remote control sensor
When using the remote control:
•Ensure that you do not drop it or expose it to moisture or high temperature.
•The remote control may malfunction under a fluorescent lamp. In this case, move the pro- jector away from the fluorescent lamp.
Inserting the Batteries
1Press the tab and lift open the battery cover in the direction of the arrow.
2Insert the batteries.
•Insert the batteries making sure the po-
larities correctly match the 
and 
marks inside the battery compartment.
3Insert the tabs on the end of the battery cover into their slots and press the cover into position.
Remote control 
signal transmitters
23' (7 m)
Remote control
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Caution
•Danger of explosion if battery is incorrectly replaced. Replace only with the alkaline or manganese batteries.
•Insert the batteries making sure the polarities correctly match the 
and 
marks inside the battery compartment.
•Batteries of different types have different properties, therefore do not mix batteries of different types.
•Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
•Remove the batteries from the remote control once they have run out, as leaving them in can cause them to leak. Battery fluid from leaked batteries is harmful to skin, therefore ensure you wipe them first and then remove them using a cloth.
•The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries.
•Remove the batteries from the remote control if you will not be using the remote control for a long time.
•Comply with the rules (ordinance) of each local government when disposing of
-16
