
ESC S n |
| Set subscript/superscript character |
Set subscript/superscript in | character | |
Hex: | (1B 53 n)H |
|
Decimal: | (27 83 n)D |
|
Octal: | (33 123 n)O |
|
n = 0: | Set superscript character | |
n = 1: | Set subscript | character |
ESC SOSet double width (one line)
This command sets the printable character to be printed horizontally enlarged (double width), it is valid only for one line.
Hex: | (1B 0E)H |
Decimal: | (27 14)D |
Octal: | (33 16)O |
ESC SP n | Set CPI |
Set character pitch of character.
In draft, the character width will be set as n/120 inch, or else it will be set as n/180 inch.
Hex: | (1B 20 n)H | |
Decimal: | (27 | 32 n)D |
Octal: | (33 | 40 n)O |
ESC T |
| Reset subscript / superscript character |
Reset subscript / superscript character. | ||
Hex: | (1B 54)H | |
Decimal: | (27 | 84)D |
Octal: | (33 | 124)O |