C.2.10 | Ignored Commands | |
• | DC1 | On line |
• | DC3 | Off line |
•ESC EM ... : Set form feed controller
•ESC X ... :
• | ESC a ... | : | Set justification |
• | ESC c ... | : |
|
• | ESC k ... | : | Set font |
•ESC q ... : Set/reset shadow font
•ESC ( G ... : Set raster graphic mode
•ESC ( X ... : Set background print
•ESC ( c ... : Set the top and bottom blank of paper
•ESC ( t ... : Arrange character table
•ESC ( ^ ... : Set print data in character mode
•ESC < : Unidirectional mode
•ESC : ... : Copy ROM to RAM
•ESC % ... : Select character set
• ESC & | Define character setr |
•ESC 6 : Set printable character
•ESC 7 : Reset printable character
Note: Ignored means the command is treated as NOP, that means, according to defined command format all bytes of this command are discarded.
DC1 | On line |
Hex: | (11)H |
Decimal: | (17)D |
Octal: | (21)O |
DC3 | Off line |
Hex: | (13)H |
Decimal: | (19)D |
Octal: | (23)O |
ESC EM n | Set form feed controller |
Hex: | (1B 19 n)H |
Decimal: | (27 25 n)D |
Octal: | (33 31 n)O |