Swann SW242-2LP user manual Starting the DVR, Detecting Installed Hard Drive, Recovering Lost Data

User Manual

Chapter 4: Starting the DVR

4.1 Detecting Installed Hard Drive

Checking HDD ……

After connecting the power, the system will boot-up and detect the installed hard drive.

On the screen it will show the hard drive information. If no hard drive is detected, check that the HDD is set to master and the tray is locked.

4.2 Recovering Lost Data

RECOVER HDD?

04811-101735

(SELECT)YES/(MENU)NO

A power failure can cause data to be lost,

however the DVR system will automatically

recover lost data after power is reconnected.

4.3 Restore Recording Feature

Power Error Detected
Restore Hard Disk	OK

Restore REC Mode………… OK

If a power error occurs during recording process, the system will automatically resume recording after power is reconnected.

- 4 -