Arming and Disarming the System
There are two ways to arm the system, using either the Keypad Alarm Control Unit or the remote. Arming the system via the remote control is quick, requiring only a couple of buttons be pushed. Arming the system via the Keypad Alarm Control Unit is likewise quick and easy, but for security purposes, you’ll need your passcode to gain access to the system.
To arm the Wireless Alarm system in Home Mode:
•Press 
on the remote control. Alternately, you can unlock the keypad control unit by typing your passcode and then press the HOME button.
•The system will begin the 30 second arming delay. After this period elapses, the sensors assigned to the Home Zone will be armed.
•You can press 
(or the ALARM button if using the keypad control unit) during the arming delay to arm the system immediately.
To arm the Wireless Alarm system in Out Mode:
•Press 
on the remote control. Alternately, you can unlock the keypad control unit by typing your passcode and then press the OUT button.
•The system will begin the 30 second arming delay. After this period elapses, the sensors assigned to the Out Zone will be armed.
•You can press 
(or the ALARM button if using the keypad control unit) during the arming delay to arm the system immediately.
To disarm the Wireless Alarm system:
•Press the 
button on the remote control.
•Alternately, you can unlock the keypad control unit using your passcode, and then press the DISARM button. If you choose to disarm the system this way, be aware that there is no entry delay: the alarm will sound as soon as a sensor is triggered. If you want to use the system in this way, ensure that you can reach the keypad control unit before triggering the alarm.
Panic Alarm
•To instantly sound the alarm in the event of an emergency, press the 
button. Alternately, you can unlock the keypad control unit using your passcode and then press the ALARM button.
•This panic alarm can be stopped by disarming the system, as described above.
14