IMPORTANT - Read Before Installing
For your safety and the safety of others, and to ensure that you get the most out of the Home Wireless Alarm System, please read and adhere to these guidelines.
•Do not expose any part of the Wireless Alarm System to any sudden shocks (such as being dropped or struck).
•Do not install the PIR Motion Sensors near any device which emits heat or cold, such as air conditioners, refrigerators, ovens, heaters, microwaves or other electronic equipment which generates heat as a
•Do not install any component of the Home Wireless Alarm System in direct sunlight.
•Use only alkaline batteries.
•All components are for indoor use only. Do not install outdoors.
•Replace the batteries in the units every six months. There are batteries in the Remote Controls, Window/Door Sensors and in the PIR Motion Sensors.
•Test the alarm periodically (every 1 - 2 months and each time you change the batteries) to ensure it is working properly.
•For the best results, ensure that the antenna on the Keypad Alarm Control Unit is extended to its maximum length. The strength of the wireless signal is dramatically affected by the placement of the antenna.
•Keep this operating instruction booklet in a safe place.
•This alarm system is designed to be, and acts as, a theft deterrent. This system, like any other, cannot offer complete protection for your home or business - it is simply an alarm system. Like all practical systems, it has limitations and it could be disabled by a skilled intruder. We suggest that you avoid relying solely on the Wireless Alarm System to protect your property, but use it as part of a comprehensive security solution. You can increase your level of protection through the use of
4