SWR Sound manual Introduction, SWR BASS 350 USER GUIDE

SWR BASS 350 USER GUIDE

INTRODUCTION

The SWR Bass 350 Bass Amplifier was designed for the player who prefers a simple and straightforward preamp combined with a power amp capable of delivering enough power and headroom for most live applications. The Bass 350 maintains the same quality components and materials found in all SWR products and is assembled by hand at our factory in California.

The two preamp gain stages utilize a specially-selected Groove Tubes 12AX7A. The tone controls incorporate ICs and the power amp is designed with very high quality bi-polar devices. Each type of device was chosen for its performance and reliability in the application used. The front panel of the Bass 350 is chromed steel, while aluminum is used for the main chassis because of its superior electrical and ther- mal characteristics and light weight. All primary electrical components are U.L. approved and SWR uses Belden Cable for all shielded wire.

Everyone at SWR sincerely hopes that the purchase of our product adds to the enjoyment of your playing and that it lives up to all your expectations and more!

Sincerely,

SWR

BASS 350 USER GUIDE 1