USING FRONT A/V INPUT JACKS
When you watch a program recorded on another source (VCR or video camera), use the | AUX |
AUDIO/VIDEO input jacks on the front of the unit. | |
Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks |
|
of this unit. |
|
Then use [CHANNEL K/L] until “AUX” appears on the screen. |
|
VIDEO | AUDIO | POWER | VOLUME | CHANNEL | STOP/EJECT REW | PLAY F.FWD REC/OTR | EARPHONE |
VIDEO AUDIO
(IN) | (IN) | Audio cable | (OUT) |
(commercially available) | |||
|
| To the Audio output jack |
|
| Video cable (commercially available) |
| |
| To the Video output jack | (OUT) | |
|
|
| |
[Front of the unit]
ex.
VCR or video camera, etc.
TV OPERATION AND SETTINGS
WATCHING A TV PROGRAM
1Plug in the power cord
After antenna or cable connection is com- pleted, connect the power cord into a stan- dard AC outlet.
NOTE:
•If any digits appear in the corner of the
screen, press [POWER] without unplugging the power cord.
2Turn on the unit
Press [POWER] to turn on the unit.
3Select the channel number
Use [CHANNEL K/L] or the Number buttons to select your desired channel number.
Note for using the Number buttons:
¡You must precede
¡When selecting cable channels which are higher than 99, press [+100] first, then enter the last two digits. (Example: to select channel 125, first press [+100] then press [2] and [5].)
4Adjust sound
Use [VOLUME X/Y] to adjust the volume.
Press [MUTE] to instantly mute | VOLUME 20 |
the sound. | C C C C C C C C C C C C |
|
Press it again to restore the previous sound level.
TO WATCH CABLE OR SATELLITE CHANNEL
•If the unit is connected to a cable box or satellite box, use [CHANNEL K/L] to select CH3 or CH4 according to the output channel setting of the device and select desired channel on that device.
TO WATCH EXTERNAL INPUT
•When an external equipment is connected to the front AUDIO/VIDEO input jacks, use [CHAN- NEL K/L] repeatedly until “AUX” appears on the screen.
EN | - 10 - |
