Sylvania 6719DC, 6727DC owner manual Playback

Models: 6719DC 6719DC, 6727DC

1 64
Download 64 pages 357 b
Page 26
Image 26

PLAYBACK

NORMAL PLAYBACK

Make sure ...

TV/DVD/VHS power must be turned on.

1Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/DVD/VHS will start playback automatically.

2To begin playback

PLAY B

Press the PLAY button.

3To stop playback

STOP

Press the STOP button when play- back is completed.

NOTES:

If you press the TV/VCR side PLAY button in the DVD mode, you can start the VCR playback.

If you press the SELECT button in the VCR playback, it will stop and the mode will change to the DVD mode. In addition, the same function operates with the DVD side PLAY button or OPEN/CLOSE button.

SLOW MOTION

During pause, press the FWD button to reduce the playback speed. The TV/DVD/VHS mutes the sound during slow motion. Press the PLAY button to return to normal playback.

NOTE: If it is left in the Slow mode for more than five minutes, the TV/DVD/VHS will automatically go into the Stop mode.

PICTURE SEARCH

This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.

1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes)

NOTE:

If you press the F.FWD or REW button on the front panel in the DVD mode, the VCR forward or reverse will start. Please press the STOP / EJECT button once to stop it, twice to eject it.

2)Press it again and the TV/DVD/VHS will now search in super high speed. (in the LP / SLP modes only)

NOTE:

Tapes recorded in the SP or LP mode will dis- play a noise bar on the TV screen and the picture may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

TRACKING ADJUSTMENT

Tracking adjustment will be set automatically

STILL PICTURE

 

You can view a still picture on the TV screen during

(Digital Tracking function) when you start play-

playback (the Still mode). Press the PAUSE button

back.

during playback. Only tapes recorded in the SLP

 

However when playing pre-recorded tapes or tapes

 

mode will show the least amount of lines.Press the

recorded on units other than your own, noise lines

PLAY button to return to playback.

 

(black and white streaks) may appear on the play-

 

NOTES:

 

back picture. If this occurs, you can adjust the

 

You can advance the picture one frame at a time by

tracking control manually by pressing the CHAN-

pressing the PAUSE button during the Still mode.

NEL K or L button until the streaks disappear. To

If it is left in the Pause mode for more than five

 

return to the DTR function, stop the tape once and

 

minutes, the TV/DVD/VHS will automatically

 

start playback again.

 

switch to the Stop mode.

 

You can reduce the noise lines by pressing the

 

 

 

CHANNEL K or L button in slow mode, too.

VERTICAL HOLD CONTROL

Tracking adjustment in Slow mode will not be set

automatically.

In the Pause/Still mode only, when the picture begins

NOTE:

to vibrate vertically, stabilize the picture by pressing

In Still mode, press the SLOW button and press the

the CHANNEL K or L button.

 

CHANNEL K or L button until streaks disappear.

NOTE:

 

To return to Still mode, press the PAUSE button

If there are video noise lines on the screen, see Tracking

again.

Adjustment section.

 

- 26 -

EN

1C29

Page 26
Image 26
Sylvania 6719DC, 6727DC owner manual Playback