46.ANT. in Jack

Connect to an antenna, cable system, or satellite system.

47.Power cord

Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to

avoid breaking a wire before you connect to a standard AC outlet.

48.COAXIAL digital audio out Jack

Connect to the digital input of an external amplifier or decoder for DVD audio only.

PREPARATION FOR USE

ANTENNA/CABLE CONNECTION

Satellite Box or

Cable Box (Not supplied)

OUT

IN

VHF/UHF Antenna (Not supplied)

From Cable System or

VHF Antenna (Not supplied)

Satellite Dish

 

 

75-ohm

From Cable

Coaxial

System

Cable

 

(Not sup-

 

plied)

75-ohm Coaxial Cable (Not supplied)

ANT.

AUDIO OUT

COAXIAL

ANT.

or

 

UHF Antenna

 

(Not supplied)

or

VHF/UHF

 

 

Combiner

 

(Not supplied)

 

[Fig. 4]

or

Flat twin-lead cable

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/VCR/DVD without a converter box.

By using this connection you can:

1)Use the TV/VCR/DVD remote to select channels.

2)Program one or more unscrambled channels for Automatic Timer Recording.

NOTE: This TV/VCR/DVD will ONLY record and view the same channel.

CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration.

By using this connection you can also record scram- bled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR/DVD Remote Control. Unattended timer recording is limited to one channel at a time.

Antenna/Cable Connections

Continued on the Next Page.

- 11 -

EN

1C29

Page 11
Image 11
Sylvania 6720FDE owner manual Preparation for USE, ANTENNA/CABLE Connection, VHF/UHF Separate Antennas