![](/images/new-backgrounds/1133740/13374037x1.webp)
TV OPERATION
WATCHING A TV PROGRAM
TV/VCR
1Turn on the TV/VCR/DVD
Press the POWER button to turn on the TV/VCR/DVD.
2Select the channel number
Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control.
Note for using the Number button on the remote control:
¡When selecting cable channels which are higher than 99, press +100 first, then, press the last two digits. (Example: to select channel 125, first press “+100” then press “2” and “5”).
¡You must preced
Remember: If the TV/VCR/DVD is connected to a cable box or satellite box, the TV/VCR/DVD must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
3Adjust sound
Press the VOLUME button X or Y to adjust the volume.
VOLUME 20
C C C C C C C C C C C C
NOTES:
•If you press the CHANNEL button K or L in the DVD mode, you can change the TV channels.
Even if you turn off the TV/VCR/DVD in the DVD mode, when you turn it on again, it will go into the TV/VCR mode.
DEGAUSSING
TV/VCR
Magnetism from nearby appliances and speakers might affect the color of the TV picture.
If this happens, move this TV/VCR/DVD away from the appliance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes later or so.
PICTURE CONTROL
TV/VCR
The TV/VCR/DVD’s picture controls – BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.
NOTES:
•Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled.
•When setting the Picture Control, the Game mode will be cancelled.
Make sure ...
•TV/VCR/DVD power must be turned on.
1Select “PICTURE CONTROL”
Press the PICTURE button on the remote control.
2Select item you want to adjust
Press the Arrow button K or L until desired control is displayed.
BRIGHT |
|
CONTRAST |
|
COLOR |
|
TINT | BRIGHT |
| – P P P P P P P C P P P P P P P + |
SHARPNESS |
|
3Adjust the picture control
Press the Arrow button s or B to adjust to your desired level.
| Arrow button s | Arrow button B |
|
|
|
BRIGHT | to decrease | to increase |
| brightness | brightness |
|
|
|
CONTRAST | to decrease | to increase |
| contrast | contrast |
|
|
|
COLOR | to pale | to brilliant |
|
|
|
TINT | to purple | to green |
|
|
|
SHARPNESS | to soft | to clear |
|
|
|
•If there is a power failure of any kind, the TV/VCR/DVD will retain its memory for this fea- ture.
- 19 - | EN |
1C29