5 Select the year | – MANUAL CLOCK SET – | |||
Press the Arrow button K or L | MONTH DAY |
| YEAR | |
until your desired year appears. | 0 5 | / 0 6 | THU | 2 0 0 4 |
(Example: 2004) | HOUR | MINUTE |
| |
Then, press the Arrow button B. | – – | : – – | – – |
|
|
|
|
| |
|
| |||
6 Select the hour | – MANUAL CLOCK SET – | |||
Press the Arrow button K or L | MONTH DAY |
| YEAR | |
until your desired hour appears. | 0 5 | / 0 6 | THU | 2 0 0 4 |
(Example: 5, PM) | HOUR | MINUTE |
| |
|
| |||
Then, press the Arrow button B. | 0 5 | : – – | PM |
|
|
|
|
| |
|
| |||
7 Select the minute | – MANUAL CLOCK SET – | |||
Press the Arrow button K or L | MONTH DAY |
| YEAR | |
until the desired minute appears. | 0 5 | / 0 6 | THU | 2 0 0 4 |
(Example: 40) | HOUR | MINUTE |
| |
| 0 5 | : 4 0 | PM |
|
AUTOMATIC CLOCK SETTING
Make sure ...
•The TV/VCR/DVD is turned on.
•Confirm the TV/VCR/DVD is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. terminal on the rear of the TV/VCR/DVD.
NOTE:
•If a cable converter box is being used, make sure it is powered on.
•You must use the TV/VCR/DVD remote control to perform the clock setting procedure.
•If the TV/VCR/DVD is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR/DVD must be set to the output chan- nel of the cable converter box or satellite box (usu- ally channel 3 or 4), to be able to set up or correct the clock automatically.
8Start the clock
Press the SETUP button on the | 5:40 PM |
remote control. |
|
Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the remote control. Use this feature to
1Select “SETTING CLOCK”
Press the SETUP button on the remote control.
Press the Arrow button K or L to select “SETTING CLOCK”. Press the ENTER button to enter “SETTING CLOCK” menu.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL
BSETTING CLOCK CHANNEL SET UP USER’S SET UP
TIME SEARCH
synchronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.
2 Set “AUTO CLOCK” to [ON] | – SETTING CLOCK – | |
Press the Arrow button B until | B AUTO CLOCK | [ON] |
“AUTO CLOCK [ON]” appears. | AUTO CLOCK CH SEARCH | |
MANUAL CLOCK SET | [ 02 ] | |
| AUTO CLOCK CH | |
| D.S.T. | [OFF] |
TO CHANGE CLOCK SETTING
If you want to change the clock, 1)Follow steps [1] and [2].
2)Select where you want to change using the Arrow button B.
3)Enter correct numbers using the Arrow button K or L.
4)Press the SETUP button on the remote control to start the clock.
3Begin “AUTO CLOCK CH SEARCH”
Press the Arrow button L to select | – SETTING CLOCK – | ||
“AUTO CLOCK CH SEARCH”. | AUTO CLOCK | [ON] | |
Press the ENTER button. | |||
AUTO CLOCK CH | [ 02 ] | ||
| B AUTO CLOCK CH SEARCH | ||
• The TV/VCR/DVD is now | MANUAL CLOCK SET |
| |
D.S.T. | [OFF] | ||
searching for the station which contain the auto clock set signal.
The search for a signal may take up to 20 seconds per channel.
• “_ _” appears at the lower left of – AUTO CLOCK CH SEARCH – |
PLEASE NOTE:
If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the ENTER button to turn [OFF] this function. Then you can manually adjust the clock.
the screen when the search has ended.
• Auto Clock station- write down the number(s) that appear on the screen. These are the auto clock
_ _
station(s) in your area. See step [4] on page 17.
•If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 17.
Press the SETUP button to exit the screen.
- 16 - | EN |
1C29
