TV/VCR SECTION
ON-SCREEN DISPLAY
STATUS DISPLAY
On screen display examples are shown | TV/VCR | ||||||||
below. |
|
|
|
|
|
|
|
| |
1 |
|
| PLAY B | 12:00AM |
|
|
| 4 | |
|
|
|
| ||||||
2 |
|
| HIFI | CH 123 |
|
| 5 | ||
|
|
|
| ||||||
|
|
|
| STEREO/SAP |
|
| 6 | ||
|
|
|
|
|
| ||||
CHECKING THE STATUS
While receiving a broadcast or playing a TV/VCR VHS tape, you can check the status dis-
played on the screen by pressing [DISPLAY]. You can also check the status of the preset MTS (Multi- Channel Television sound). The display will change as shown below each time you press [DISPLAY].
3 | SP | COUNT 0:00:00 | 7 |
1. VCR status
Displays the current VCR motion:
PLAY / STOP / REC / OTR / PAUSE / FF / REW
2.VCR sound mode status (during playback) Displays "HIFI" when the tape is recorded in
3.Tape speed (during recording)
Displays the tape speed: SP / SLP
4.Clock
5.Channel number (in TV mode) Displays the current channel number. "AUX" is displayed in external input mode.
6.MTS status (in TV mode)
Displays the current sound status of the broad- cast: STEREO / SAP
7.Tape counter (during playback or recording) Shows the elapsed recording or playback time. (Not available for a blank tape or blank portions on the tape.) You can reset the counter by press- ing [CLEAR].
WHEN THE CLOSED CAPTION IS OFF
The display switches among VCR counter and clock.
Display OFF | COUNTER display | CLOCK display | |
| STOP | STOP | 5:40PM |
|
|
| CH2 |
| SP COUNT 0:12:34 | SP |
|
| After 5 seconds | After 5 seconds | |
|
|
| 5:40PM |
|
|
| CH2 |
COUNT 0:12:34
WHEN THE CLOSED CAPTION IS ON
The display switches among VCR counter and clock.
Display OFF | CLOCK/COUNTER | |
|
| display |
| STOP | 5:40PM |
|
| CH2 |
*The display will disappear
SP COUNT 0:12:34 | after 5 seconds |
|
MTS (Multi-channel Television Sound) SYSTEM
MTS allows for reception of sound other than the main audio program. You can listen or record | TV/VCR |
monaural audio sound, stereo sound or Secondary Audio Program (SAP). |
|
WHEN RECEIVING AN MTS BROADCAST
Press [TV/VCR Audio] repeatedly to select a sound mode when you watch or record a TV program.
•The mode changes according to the broadcast among "STEREO",
"SAP" and "MONO" every time | STEREO |
you press the button. |
|
NOTES:
•The initial setting is "STEREO". The unit records auto- matically MTS broadcasts in
•If you select "SAP" when second audio is not available, the unit will record in normal audio.
•This setting returns to the initial value when you turn off the unit or unplug the power cord.
WHEN PLAYING CASSETTES
Press [TV/VCR Audio] repeatedly to select "HIFI" or "MONO".
• This setting is saved until the cassette is ejected.
NOTE:
•The initial setting is "HIFI". When you play
WHEN IN THE EXTERNAL INPUT ("AUX") MODE
Any output mode setting does not affect the audio output, and the current audio output mode does not appear on the TV screen.
14
EN
