Sylvania 6724DG V, P

VIDEO CASSETTE

This unit will operate with any cassette that has the

mark.For best results, we recommend the

use of high-quality tapes.Do not use poor quality or

damaged tapes.

SELECTING TAPE SPEEDS

Before recording, select the tape speed from :SP

mode (Standard Play) or SLP mode(Super Long

Play).You can also play a tape recorded in LP mode

(Long Play).

ERASE PREVENTION

Break off the tab on the

back edge of the cassette

to prevent accidental eras-

ing of recording.

Cover the hole with plastic

tape to record on the tape

again.

NOTES:

•In the TV/VCR mode, if the cassette without tab is insert-

ed, playback will start automatically.

•If you press [REC/OTR]or [REC] when a cassette with-

out tab is inserted, the unit will eject it automatically.

Tab

Plastic Tape

PLAYBACK

ON SCREEN DISPLAY / VIDEO CASSETTE / PLAYBACK TV/VCR SECTION

Tape Speed Recording/Playback time

T120 T160T60Type of tape

2 hours 2-2/3 hours1 hourSP mode

6 hours 8 hours3 hoursSLP mode

TRACKING ADJUSTMENT

•Tracking adjustment will be set automatically when

you start playback (Digital tracking function).

•If noise lines (black and white streaks) appear on

the playback picture, use [CH.KK/ LL]until the

streaks disappear (Manual tracking adjustment).

This is available in Pause/Still/Slow mode, too.

•To release manual tracking mode, stop the tape

once and start playback again.

STILL PICTURE

•During playback, press [PAUSE F]to freeze the

picture.

You can advance the picture frame by frame by

pressing [PAUSE F]repeatedly.

•To release the Still mode, press [PLAY BB].

SLOW MOTION

•During playback, press [PAUSE F]then press

[FWDD].

•To release the Slow mode, press [PLAY BB].

NOTE:

•If the unit keeps the slow mode or still mode for more

than 5 minutes, it will automatically enter the stop mode.

PLAY B

STOP

REW E

FF D

BASIC PLAYBACK

TV/VCRTV/VCR

EJECT A

1Insert a pre-recorded tape so that the

unit turns on automatically (Auto

Power On).

2Select TV/VCR mode by pressing [SELECT].

NOTE:

•If the erase-prevention tab has been removed, the

unit will change the VCR mode and starts playback

automatically.

3To star t playback,

press [PLAY BB].

NOTE:

•Even in the DVD mode, you can start the VCR play-

back if you press [PLAY BB]on the front panel (of

the TV/VCR side).

4To stop the playback,

press [STOP CC].

5To rewind the tape,

press [REVE].

To f orward the tape,

press [FWDD].

To stop winding, press [STOP CC].

6To eject the tape from the unit,

press [STOP/EJECT C A]

on the front panel.

T2200UA_EN.QX4 06.2.13 3:44 PM Page 15