![](/images/backgrounds/184196/bg18.png)
- 24 - EN
0B19
TO CANCELAN AUTOMATIC TIMER
RECORDING
•After setting a program;
1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 22 and select a
program you want to cancel.
3)Press the T-PROG. CLEAR button.
4)Press the MENU button on the remote control to
return to TVmode.
•While recording is in progress;
1)Press POWER button.
2)Press the STOP/EJECT button on the TV/VCR.
TO CHECK THE BEGIN/END TIME
1)Press the POWER button so that the REC indica-
tor goes off.
2)Press the MENU button on the remote control.
3)Confirm “TIMER PROGRAMMING” is pointed.
4)Press the F.FWD/Bbutton. The details of pro-
grams appear on the TVscreen.
5)Press the MENU button on the remote control to
return to TVmode.
HINTS FOR AUTOMATICTIMER RECORDING•Make sure the channel you want to record is prop-
erly set in advance.
•It is not necessary to press the RECORD button for
timer recording.
•Recording begins automatically at the Start time.
•If you are recording using a Timer mode, you may
not operate the unit manually.
•The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
•If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
•If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate-
ly, and the tape will be ejected.
AUTO RETURNWith this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1
Select “USER’S SET UP”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “USER’S SET UP”.
Then, press the F.FWD/Bbutton.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
2
Set “AUTO RETURN” to [ON]
Press the PLAY/Kor STOP/Lbut-
ton to point to “AUTO RETURN”.
Press the F.FWD/Bor REW/s
button until [ON] appears.Then,
press the MENU button on the remote control to
return to TVmode.
3
Auto Return will begin
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the record-
ed program(s).
NOTE:
•If you press the POWER button while tape is
rewinding, the Auto Return will stop.
4
Watch the recorded program
Press the PLAYbutton.
TO CANCEL THE AUTO RETURN
MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/Bor REW/sbutton.Then, press the MENU
button on the remote control to return to TVmode.
If there is a powerfailure of any kind, the unit
will retain its memory forthis feature.
– USER’S SET UP–
RENTAL [OFF]
REPEAT PLAY [OFF]
BAUTO RETURN [ON]
WAKE UPTIMERThe Wake Up Timer function turns on the TV/VCR
without using the POWER button after a desired
period of time.
NOTES:
•Use the remote control forthis procedure.
•Clock must be set to the correct time before setting
the timer.
•If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will start
playback automatically on your desired time.
1
Select “WAKE UPTIMER”
Press the WAKE-UP/SLEEPbutton
on the remote control once, and
confirm “ON/OFF” is pointed.
Press the F.FWD/Bor REW/s
button until [ON] appears.
WAKE UPBON/OFF [ON]
TIMER TV/TAPE [TV]
TIME [12:00AM]
T5207.QX33 01.3.19 10:19 AM Page 24