PLAYING A DISC
PLAYING A DVD VIDEO
OR AN AUDIO CD
DVD 
CD
Getting started
Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.)
1Press the POWER button.
¡The power will turn on.
2Press the OPEN/CLOSE button.
¡The disc loading tray will open.
3Place a disc into the tray.
¡Make sure the disc is sitting properly in the correct recess, with the label side up.
Notes
¡A “prohibited icon” may appear at the
¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.
¡With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.
¡During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a mal- function.
4Press the PLAY button.
¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.
¡When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to “USING THE TITLE MENU”.
5Press the STOP button to stop play.
USING THE DVD MENUS
DVD
Some DVDs contain their own menus, such as a guid- ance menu which describes the contents of the disc or a selection menu for sound, language and other cus- tomized settings.
1Press the MENU button.
¡The DVD menu will appear.
2Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.
3Playback will start from the selected title.
– 13 – | EN |
1L25
