Sylvania LC195SL9C owner manual 5Manual Register, Manuall Registeri, Antenna

OPTIONAL SETTING

5Manual Register 5Antenna Confirmation

The manual register function lets you add the channels that were not scanned by the auto channel scan due to the reception condition at the initial setup.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

3Use [Cursor K/L] to select “Manual Register”, then press [ENTER].

DTV

This function lets you check the digital signal strength of each channel.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

3Use [Cursor K/L] to select “Antenna”, then press [ENTER].

	Channell
Channell	Autoscan
	Channel List
Autoscan	Manual Register
Channel List	Antenna
Manual Register
Antenna

4Use [the Number buttons] to enter the number of the channel you want to add, then press [ENTER].

4Use [the Number buttons] or [CH K/L] to select the channel for which you want to check the digital signal strength.

11

Manuall Registeri

For analog channels, select a		Register
channel to register using number
keys.
For digital channels, you must
perform Autoscan function.
Ch Change	BACK
		Back

		11-1
Antenna
		Back
Now	70 Peak	80
CH	Ch Change

5Press [SETUP] to exit.

Note:

•If set up completes successfully, “Registered to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH K / L], you can select the memorized channels only.

•If the channel is set to analog channel or external input, you cannot confirm the antenna condition.

11

Antenna

Back

Indicator is available for digital broadcasting only.

CH Ch Change

5Press [SETUP] to exit.

20

EN