Sylvania LC195SL9C owner manual 5PC Settings, Auto Adjustment

5PC Settings

This function lets you adjust the PC screen position, clock and phase during PC input.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “DETAIL”, then press [ENTER].

5 Adjust the setting.

Auto Adjustment

Use [Cursor K/L] to select “Adjust”, then press [ENTER].

Auto Adjustmentj

This function automatically	Cancel
adjusts the position, clock and	Adjust
phase of the picture element.

INTRODUCTION PREPARATION INITIAL SETTING

3Use [Cursor K/L] to select “PC Settings”, then press [ENTER].

Detailil

Closed Caption
V–chip
PC Settings
HDMI1 Audio	Auto
Energy Saving Mode	On

4Use [Cursor K/L] to select the setting you want to adjust, then press [ENTER].

PC Settinings

Auto Adjustment

Horizontal Position	0
Vertical Position	0
Clock	0
Phase	0

• The horizontal / vertical position, clock and phase of					WATCHING
the PC screen are automatically adjusted.
Horizontal Position, Vertical Position
Use [Cursor s/B] to adjust.					TV
			Cursor s	Cursor B	OPTIONAL
Horizontal Position			to move PC	to move PC
H. Position	0 -
			+	screen right
Adjust	Move	ENTER Enter	screen left
					SETTING
Adjust	Move	ENTER Enter	screen down	screen up
Vertical Position			to move PC	to move PC
V. Position	0 -		+		TROUBLESHOOTING
Clock, Phase			Cursor s	Cursor B
Use [Cursor {/B] to adjust “Clock” setting to stabilize
the PC screen and “Phase” setting to improve the clarity
of the PC screen.
Clock					INFORMATION
Clock	0
Adjust	Move	ENTER Enter	to decrease	to increase
Phase			setting value	setting value
Phase	0
Adjust	Move	ENTER Enter

6Press [SETUP] to exit.

Note:

•Adjust “Phase” setting after “Clock” setting has been properly adjusted.

•You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually.

•The limit value of the horizontal / vertical position differs depending on PC input signal.

31

EN