Sylvania LC260552 Pressing CH − reverses the direction of the input modes, Screen, Picture

English

Switching Each Input Mode can easily switch with the remote control between TV (ATSC or NTSC) and external devices when they are connected to the unit.

Press SOURCE or CH + repeatedly to cycle through the input modes.

e.g.)								Source
								TV
		11.1	Video	Component	HDMI1	HDMI2	HDMI3	VideoHDMI1
								ComponentHDMI2
	DTV /TV channel				(or PC input)			HDMI1Component
								HDMI2Video
								HDMI3PC

• Pressing CH − reverses the direction of the input modes.

TV Screen Display Mode

5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal.

Press FORMAT repeatedly to switch the TV aspect ratio.

For 16:9 video signal				Normal displays a 16:9 picture at its original size.
				4:3 displays a 16:9 picture at a 4:3 size; the picture is
				shortened horizontally. Sidebars appear on both edges
				of the screen.
				Movie Expand displays a 16:9 picture that is vertically
Normal		4:3	Movie Expand	stretched to fill the screen.This only crops out the top
				of the picture.
				Zoom displays a 16:9 picture at its maximum size
				without changing its horizontal and vertical ratio.
				Wide displays a horizontally stretched picture. This
				crops out the left and right sides of the picture.
	Wide		Zoom
For 4:3 video signal				Normal displays a 4:3 picture at its original size.
				Sidebars appear on both edges of the screen.
				16:9 displays a 4:3 picture at a 16:9 size; the picture is
				stretched horizontally to fill the screen.
				Movie Expand displays a 4:3 picture at a 16:9 size; the
Normal		16:9	Movie Expand	picture is stretched more vertically at the top of the
				screen.This crops out the top of the picture.
				Zoom displays a 4:3 picture at a 16:9 size; at its
				maximum size that is more vertically stretched to fill
				the screen.This crops out the top and bottom of the
				picture.
	Wide		Zoom
				Wide displays the picture with its center at the original
				size and the edges stretched horizontally to fill the
				screen.

13

INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS CONNECTING DEVICES USEFUL

For PC input signal through HDMI1 Input mode

Normal Full Dot By Dot

Normal displays a proportionately stretched picture. Sidebars appear on both edges of the screen.

Full displays a picture that is stretched out of proportion horizontally to fill the screen.

Dot By Dot displays a picture in its original size.

TIPS INFORMATION

Channel Selection

Select channels by using CH +/− or the Number buttons.
• To select the memorized channels, use CH +/− or the Number buttons.			11.1
• To select the non-memorized channels, use the Number buttons.
To use the Number buttons		NTSC
ATSC
- When selecting digital channel 11.1	-	When selecting cable or analog channel 11
Be sure to press • before entering the subchannel number.

Press PREV CH to return to the previously viewed channel.

Note	•	[No Signal] will appear on the TV screen after the subchannel broadcast is over.
	•	[Audio only program] message will appear on the TV screen, when you receive only sound signal.