6

Supplied Accessories

Owner’s Manual

Quick Start Guide Registration card

 

 

 

 

 

 

 

 

 

 

Quick

Start

Installation

Installation

Instalación

Attaching the Base

You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. At least 2 people are required for these steps.

1 Check the text “FRONT” with “arrow“ on the Base’s bottom to ensure it is being installed in the correct direction. Spread a thick and soft cloth over a table as shown at step 2. Place the main unit face down onto it. Make sure not to damage the screen.

TV base and 4 screws (M4 x 20)

Remote Control (NH210UD) Batteries (AAA, 1.5V x 2)

2 Insert 2 hooks under the

bottom of the main unit

 

into base holes. (shown by

 

arrow ), then move the

 

base in the direction as

 

shown by arrow until it

 

stops and the screw holes

 

FRONT

AAA

AAA

Note

If you lose the screws, please purchase M4×20 Phillips head screws at your local store.

If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual.

When using a universal remote control to operate this unit.

Make sure the component code on your universal remote control is set to our brand. Refer to the manual accompanying your remote control for more details.

We do not guarantee 100% interoperability with all universal remote controls.

Symbols Used in this Manual

The following is the description for the symbols used in this manual. Description refers to:

ATSC : Digital TV operation

NTSC : Analog / Cable TV operation

If neither symbol appears, the operation is applicable to

both.

are aligned. Make sure not to put the AC power cord between the base and the unit.

3 Drive Phillips head screws into the 4 threaded holes at the bottom of the base until they are tight.

To remove the base from this unit

Unscrew the Phillips head screws in step 3.

After the screws are removed, move the base in the opposite direction as shown by arrow in step 2, then pull the base up toward the rear of the unit. Be careful not to drop the base when you remove it.

Note

When attaching the base, ensure that all screws are tightly fastened. If the base is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.

Make sure to use a table which can support the weight of this unit and is larger than this unit.

Make sure the table is in a stable location.

When attaching the base, ensure that “FRONT” with “arrow” written on the bottom of the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.

Mounting the Unit on Your Furniture

Screw this unit on your furniture tightly using wood screws (not supplied) in the 2 holes at the back of the base as shown.

Recommended screw dimension : 3/16 x 3/4 inches(5.1 x 20 mm) rear of this unit

screw holes

Note

When you remove this unit make sure to unscrew the wood screws from your Wood Stand, Furniture and other wood item.

Page 6
Image 6
Sylvania LC260552 owner manual Supplied Accessories, Attaching the Base, Symbols Used in this Manual

LC260552 specifications

The Sylvania LC260552 is a versatile LED light fixture designed for both residential and commercial use, offering an array of features that make it a popular choice for various lighting applications. This model exemplifies energy efficiency and reliability, providing exceptional brightness while consuming minimal power.

One of the main features of the Sylvania LC260552 is its powerful luminous output. With around 2600 lumens, it is capable of illuminating large spaces effectively, making it suitable for kitchens, office environments, and indoor areas requiring bright, clear lighting. The fixture operates at a low wattage, significantly reducing electricity costs and co2 emissions, aligning with modern sustainability goals.

In terms of technology, the Sylvania LC260552 employs advanced LED technology, ensuring a longer lifespan compared to traditional incandescent or fluorescent bulbs. The typical lifespan of this model exceeds 25,000 hours, greatly reducing the frequency of replacements. This durability makes it a cost-effective solution in both residential and commercial settings.

The design of the Sylvania LC260552 is also worth noting. Its sleek and modern aesthetic allows it to blend seamlessly into various interior designs, whether it’s in a contemporary office or a traditional home living space. The fixture is lightweight and easy to install, often requiring minimal tools for mounting.

Another significant characteristic is its color temperature options. The LC260552 is available in several color temperatures, allowing users to choose between warm white and cool daylight depending on the ambiance they wish to create. This adaptability benefits spaces like retail environments, where different lighting can affect customer experience and product visibility.

Moreover, the Sylvania LC260552 provides excellent brightness with minimal flicker, which is essential for reducing eye strain in settings where people spend extended periods. The product is also designed to be compatible with dimmer switches, giving users greater control over their lighting environment.

In summary, the Sylvania LC260552 stands out for its impressive luminous efficiency, longevity, and aesthetic versatility. With state-of-the-art LED technology and customizable features, it is an optimal choice for anyone looking to enhance their lighting solutions while maintaining energy efficiency and cost-effectiveness.