18
Channel List
The channels selected here can be skipped when selecting the channels using CH + / −.
Those channels can still be selected with the Number buttons.
1 Use ▲/▼ to select [Channel List], then press OK.
2 Use ▲/▼ to select the channel you want to remove, then press OK.
Antenna Confirmation
ATSC
This function lets you check the digital signal strength of each channel.
1
2 Use the Number buttons or CH + / − to select the channel for which you want to check the digital signal strength.
Picture
Sound
Setup
Features
Language
Channel List
|
|
|
|
|
| DTV | 6.1 |
Highlight channels for |
| DTV | 8.1 |
Ch Up / Down key selection. |
|
| 9 |
|
|
| 27 |
|
| DTV | 48.1 |
|
|
| 58 |
|
| DTV | 67.1 |
|
|
|
|
Ch Select | Watch / Skip | Back |
|
|
| 11.1 |
Antenna |
|
|
|
Picture |
|
| Back |
Sound |
|
|
|
Setup | 50 | Max | 50 |
Current | |||
Features |
|
|
|
•The channel display for the removed channel darkens. You will not be able to select the channel again using CH +/−.
•To reactivate a removed channel, use ▲/▼ and press OK.The registered channels are highlighted.
•When you remove a main channel, its subchannels are removed as well.
Note
•The channel with the [DTV] indicated on the display is ATSC. Otherwise the channel is NTSC.
Add Channels
This function lets you add the off the air along NTSC or analog Cable channels that were not added by the autoprogram due to reception conditions at the initial setting.
1 Use ▲/▼ to select [Add Channels], then press OK.
2 Use the Number buttons to enter the number of the channel you want to add, then press OK.
11
Add Channels
Language |
Ch Change |
Note
•If the channel is set to analog channel or external input, you cannot confirm the antenna condition.
Features
1 Use ▲/▼ to select the item you want to adjust, then press OK.
| Features |
| |
Picture | Closed Caption |
| |
Sound | Child Lock |
| |
| |||
|
| ||
Setup | Energy Saving Mode | On | |
Location | Home | ||
| |||
Features | Current Software Info |
| |
Language |
|
|
2 Adjust the following items.
Picture
Sound
Setup
Features
Language
For analog channels, select a channel to be added using number keys.
For digital channels, you must perform Autoprogram function.
Ch Change | Back |
Add Channels
Closed Caption
You can view closed captioning (CC) for TV programs, movies and news. Closed caption refers to text of dialog or descriptions displayed
Use ▲/▼ to select [Closed Caption], then press OK. See the following description for setting each item.
Note
•If setup completes successfully, [Added to the channel list.] is displayed.
•If external input is used, it is not possible to register the channel and [Unavailable] will be displayed on the TV screen.
•By using CH + / −, you can select the memorized channels only.