Sylvania LC370SS9 owner manual 5PC Settings, Auto Adjustment, Clock, Phase, Enter

5PC Settings

This function lets you adjust the PC screen position, clock and phase during PC input.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “DETAIL”, then press [ENTER].

3Use [Cursor K/L] to select “PC Settings”, then press [ENTER].

Detailil

Closed Caption
V–chip
PC Settings
HDMI1 Audio	Auto
Energy Saving Mode	On

4Use [Cursor K/L] to select the setting you want to adjust, then press [ENTER].

PC Settingsi

Auto Adjustment

Horizontal Position	0
Vertical Position	0
Clock	0
Phase	0

						INTRODUCTION
5 Adjust the setting.						PREPARATION
Auto Adjustment
Use [Cursor K/L] to select “Adjust”, then press
[ENTER].
			Auto Adjustmentj			WATCHINGTV
			This function automatically adjusts Cancel
			the position, clock and phase of
			the picture element.		Adjust
• The Horizontal/Vertical position, clock and phase of						OPTIONAL
the PC screen are automatically adjusted.
Horizontal Position, Vertical Position						SETTING
Use [Cursor s/B] to adjust.
			Cursor s		Cursor B	TROUBLESHOOTING
Adjust	Move	ENTER Enter	screen down	screen up
Horizontal Position			to move PC	to move PC
H. Position	0 -		+	screen right
Adjust	Move	ENTER Enter	screen left
Vertical Position			to move PC	to move PC
V. Position	0 -
			+			INFORMATION
Clock, Phase
Use [Cursor {/B] to adjust “Clock” setting to stabilize
the PC screen and “Phase” setting to improve the clarity
of the PC screen.
			Cursor s		Cursor B
Clock
Clock	0
Adjust	Move	ENTER Enter	to decrease	to increase
Phase			setting value	setting value
Phase	0
Adjust	Move	ENTER Enter

6Press [SETUP] to exit.

Note:

•Adjust “Phase” setting after “Clock” setting has been properly adjusted.

•You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually.

31

EN