Sylvania LD190552 owner manual Disc Menu, Resume Playback, Paused and Step-by-step Playback

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

Playback

Before you begin:

Turn on the amplifier and any other equipment which is connected to this unit. Make sure the external audio receiver (not included) are set to the correct channel.

1 Press POWER to turn on the unit.

2 Insert a disc with label facing forward.

# CAUTION

• Do not put coins or foreign objects into the disc loading slot.

•In case the DVD was recorded on both sides, make sure the label of the side you want to play back is facing forward.

3 The unit switches to the DVD mode when the unit was in TV mode and detects the type of disc.

• Press PLAY B if the unit does not go to the DVD mode.

4 The unit starts playback.

•If playback does not start automatically, press PLAY B again.

5 Press STOP C to stop playback temporarily.

•If playback remains stopped for 20 minutes, the unit will go into standby mode automatically when

[AUTO POWER OFF] is set to [ON].

6 Press A EJECT to eject the disc.

Note

•[ ] may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.

•Some DVD may start playback from title 2 or 3 due to specific programs.

•During the playback of a 2-layered disc, pictures may stop for a moment.This happens while the 1st layer is being switched to the 2nd layer.This is not a malfunction.

•When you cannot remove the disc, you may try either following operations.

-Press and hold A EJECT on the unit for more than 5 seconds.

-Unplug the AC power cord and plug it in again, then press

AEJECT.

It will take about 10 seconds to eject the disc, while that the unit will not respond to any key commands.

Disc Menu

DVD

Some discs contain disc menus which describe the contents of the disc or allow you to customize disc playback, or title menu which lists the titles available on the DVD.

	English	29
To display the DVD menu, press DISC MENU and use		INTRODUCTION
▲/▼/◄/► to select an item, then press ENTER (or
PLAY B).
To display the top menu, press TITLE and use
▲/▼/◄/► to select an item, then press ENTER (or
PLAY B).
Note
		PREPARATION
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
Resume Playback
Press STOP C during playback. Resume message will appear		WATCHING
playback was stopped.
on the TV screen.
Press PLAY B. Playback will resume from the point at which
		TV
Note
• To cancel resume, press STOP C one more time in the stop mode.
On some discs, STOP C will not work while the resume message		USING
appears. Please wait until the message disappears.
• The resume information will be kept even when the unit goes		FUNCTIONS
into standby mode. However, ejecting the disc will cancel the
resume feature. Playback will start at the beginning the next time
you insert the disc.
		OPERATING
Press PAUSE F during playback.
Paused and Step-by-step Playback
• Playback will be paused and sound will be muted.		DVD
DVD
		CONNECTING
To continue playback, press PLAY B.
Each time you press PAUSE F in the pause mode, the disc
goes forward one frame at a time.
		DEVICES
• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures
Note
in the pause mode are blurred. ➠ p.27
		USEFUL
Fast Forward / Fast Reverse
		TIPS
Press FWD D or REV E repeatedly during playback to
select the desired forward or reverse speed.
		INFORMATION
To continue playback, press PLAY B.
Note
• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures
in the fast playback mode are blurred. ➠ p.27
• Fast forward / fast reverse speed varies with disc. Approximate
speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and
1(2x), 2(8x) and 3(30x) on audio CD.
• For DVD, sound will be muted during this function.
• For audio CD, sound will be intermittent during the search.