35
EN
WATCHING TV
OPTIONAL SETTING
OPERATING DVD
INTRODUCTION CONNECTION INITIAL SETTING DVD SETTING INFORMATION
TROUBLESHOOTING

Black Level Setting

Black Level Setting

DVD
Adjust the black level to make the dark areas of the TV picture brighter.
1During playback, press [MODE] repeatedly until
““ appears.
OFF (BLACK LEVEL)
2Use [Cursor K / L] to adjust the black level.
or
ON (BLACK LEVEL)
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
3Press [RETURN] to exit.
Note:
• The setting will be kept even if the unit is turned off.

Stereo Sound Mode

Stereo Sound Mode

CD
This unit allows you to select a sound mode during audio CD playback.
During playback, press [AUDIO] repeatedly until the
desired sound mode appears.
STEREO
• Each time you press [AUDIO], the sound mode
changes as example below.
STEREO
(stereo sound with left and right channels)
L-ch (left channel sound only)
R-ch (right channel sound only)
Note:
• Virtual surround cannot be changed when the sound mode is
set to either “L-ch” or “R-ch”.

Virtual Surround

Virtual Surround

You can enjoy virtual surround on your existing 2 channel stereo system.
1During playback, press [MODE] repeatedly until
““ appears.
OFF (SURROUND)
2Use [Cursor K / L] to select the sound level.
or
1 (SURROUND)
1 : Natural effect
2 : Emphasized effect
OFF : No effects (original sound)
3Press [RETURN] to exit.
Note:
• The setting will be kept even if the unit is turned off.
• For audio CD, virtual surround will not be effective if the
sound mode is set to something other than “STEREO”.
See “Stereo Sound Mode”.
• Turn down the level or select “OFF” if the sound is distorted.