Sylvania SRDV495 owner manual Connection to an Audio System

Connections

Connection to an Audio System

•Before changing the connections, all devices should be turned off.

•Refer to each owner’s manual for further information on other devices.

Method 1 (VCR/DVD Sound)

Stereo system

Analog audio

input jacks

AUDIO

Method 2 (DVD Sound Only)

Receiver with Dolby

Digital Decoder

Audio cable

(supplied)

This unit

AUDIO OUT

DVD/VCR

AUDIO OUT

L

R

or

DVD

AUDIO

OUT

	COAXIAL	Digital audio
		input jack
Coaxial Digital
Audio cable
(not supplied)
DIGITAL		DVD
		DIGITAL
		AUDIO OUT
AUDIO OUT
		COAXIAL

Note

• If you connect this unit to a receiver with a Dolby

Digital decoder and set “Dolby Digital” to “Stream”

L

R

(DVD Audio only)

for the “Digital Out” setting in the SETUP menu.

(Refer to pages 30-31.)

• If output is DTS encoded audio, connect to a DTS

decoder and set “DTS” to “ON” for the “Digital

Out” setting in the SETUP menu. (Refer to pages

30-31.)

• A Dolby Digital 5.1 channel surround format can-

not be recorded as digital sound by an MD or DAT

deck.

• Unless connected to a receiver with a Dolby Digital

decoder or a DTS decoder, set “Dolby Digital” to

“PCM” and “DTS” to “OFF” for the “Digital Out”

setting in the SETUP menu. Playing a DVD using

incorrect settings may generate noise distortion and

may also damage the speakers. (Refer to pages 30-

31.)

• Set “Dolby Digital” to “PCM” for the “Digital Out”

setting in the SETUP menu for connecting to an

MD deck or DAT deck. (Refer to pages 30-31.)

• By hooking this unit up to a receiver with a Multi-

channel Dolby Digital decoder, you can enjoy high-

quality Dolby Digital 5.1 channel surround sound as

heard in movie theaters.

12