Sylvania SRPD442 owner manual Changing the Aspect Ratio Screen Mode, Mode Picture Explanation

OPERATING THE PLASMA DISPLAY

CHANGING THE ASPECT RATIO (SCREEN MODE)

POWER

VOL

MUTE

SCREEN MODE

SCREEN MODE

STILL

INPUT SELECT

DISPLAY

Each time you change the screen mode, the name of the selected mode is displayed on the screen for approximately 4 seconds.

The SCREEN MODE button switches between the screen modes in the following pattern.

Normal Full Wide Zoom

NOTE:

By changing the aspect ratio of the screen you can select the manner in which you wish to view the picture.

1 Press the SCREEN MODE button to display the current screen mode.

2 Press the SCREEN MODE button a second time to change the screen mode.

•When switching the input signal, the audio mute turns ON temporarily.

•You can only select the "Normal" and "Zoom" screen modes for 1080i and 720p video signals connected to the COMPONENT 2 terminal.

Mode			Picture	Explanation
		Normal		Normal will display a 4:3 picture at its standard 4:3 size.
Normal
				For 1080i and 720p video signals, a picture will be displayed
				at 16:9 size.
		Full
Full				Full will display a 4:3 picture at a 16:9 size, with horizontal
				elongation necessary to fill the screen.
	Wide			Wide will display a 4:3 picture at a 16:9 size, with less
Wide
				horizontal elongation necessary to fill the screen because a
				little bit of the top and bottom will be cut off.
				Zoom will magnify the entire 4:3 picture to fill the screen, with
	Zoom
				no horizontal elongation to fill the screen, as more of the top
Zoom				and bottom are cut off. Use this mode to view letterboxed 4:3
				picture content to get a widescreen picture. A 16:9 picture will
				be magnified similarly, but to a lesser extent.

12