IMPORTANT SAFETY INSTRUCTIONS
Thank you for purchasing this plasma display.
Please make sure to read this manual before using the plasma display, and pay particular attention to the Safety Instructions enclosed within.
When you have finished reading this manual, store it in a safe place for easy access in the future.
When moving the plasma display
Due to the weight of this plasma display, two peo- ple should be used when moving it. Both people should make sure to grasp the top of the display with one hand, and the base of the display with the other hand, as in the following illustration.
Regarding This Manual
•Product and company names appearing within this manual are trademarks or registered trade- marks of their respective owners.
•Although special care has been taken to ensure that all information contained within this manual is correct at time of writing, the information is subject to change without notice.
•Make sure to read the manual carefully and fol- low all instructions contained within. We will not be held responsible for any damages caused by improper use or handling of this product.
•Reproducing this manual by any means, in whole or in part, is prohibited.
Figure 1
Optional Accessories
To mount the plasma display on a wall, the follow- ing accessory is available:
VISIONMOUNT™ Flat Panel TV Wall Mount from SANUS SYSTEMS, for large flat panel televisions (32” to 60”). Refer to page 25 for mounting the plasma display.
NOTE
The wall mounts are not supplied with the plasma dis- play.
#CAUTION
•This PDP SRPD442 is for use only with the Sanus Systems Model VMPL. Wall Mount. Use with other wall mounts is capable of resulting in instability, causing possible injury.
•When mounting the plasma display with the Sanus Systems wall mount, make sure to mount it on the wood studs inside the wall, as failure to do so may result in instability, caus- ing possible injury.
•Refer to the instruction manual included with the wall mount for details when securing the plasma display to the wall.
4
