Sylvania SSR90V4 Connection to an Audio System, Digital decoder, you can enjoy high-quality Dolby

Connections

Connection to an Audio System

•When you change the connections, all devices should be turned off.

•Refer to each owner’s manual for further information on other devices.

Before you

Method 1

Stereo system

Analog audio

input jacks

AUDIO

Method 2

Dolby Digital decoder,

MD deck or DAT deck

COAXIAL	Digital audio
	input jack

Audio Coaxial

start Connections

Audio cable

(supplied)

This unit

AUDIO OUT

DVD/VCR

AUDIO OUT

L

R

or

DVD

AUDIO

OUT

Digital cable

(commercially

available)

DVD

DIGITAL	DIGITAL
	AUDIO OUT
AUDIO OUT
	COAXIAL

Getting started Recording

L

R

(only in DVD mode)

	Playing
Note	discs
• If output is Dolby Digital encoded audio, connect
to a Dolby Digital decoder and set “Dolby Digital”
to “Stream” for the “Digital Out” setting in the
SETUP menu. (Refer to pages 90-91.)	Editing
channel surround format cannot be recorded as
• The audio source on a disc in a Dolby Digital 5.1
digital sound by an MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set
rect settings may generate noise distortion and may	Changingthe
“Dolby Digital” to “PCM” for the “Digital Out” set-
ting in the SETUP menu. Playing a DVD using incor-	SETUP
• Set “Dolby Digital” to “PCM” for the “Digital Out”
also damage the speakers. (Refer to pages 90-91.)
setting in the SETUP menu for connecting to an	menu
MD deck or DAT deck. (Refer to pages 90-91.)
• By hooking this unit up to a Multi-channel Dolby	VCR
Digital decoder, you can enjoy high-quality Dolby
Digital 5.1 channel surround sound as heard in the	functions
movie theaters.
	Others
15	Español