Cordless Telephone Operation
Receiving Calls with the HANDSET on the BASE UNIT
1.When the phone rings, lift the HANDS E T. The IN USE LED indicator will light up.
NOTE: The HANDSET RINGER ON/OFF switch must be in the “ON” position for ringer to operate.
2.Start your conversation.
3.To end your conversation, either press the TALK button or place the HANDSET on the BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE CRADLE, you activate the automatic STANDBY feature.
| In Use |
| Low Batt. |
REDIAL | PAUSE |
CH | VOL |
MUTE | |
MEMO | FLASH |
TALK3
Receiving Calls with the HANDSET off the BASE UNIT
1.When the phone rings, press the TALK button. The IN USE LED indicator will light up.
2.Start your conversation.
3.To end your conversation, either press the TALK button or place the HANDSET on the BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE CRADLE, you activate the automatic STANDBY feature.
Storing Numbers
1.Be sure the BASE UNIT IN USE LED indicator is off and the HANDSET is in STANDBY mode.
2.Press the MEMO button.
3.Dial the number you want to store.
4.Press the MEMO button again.
5 . Dial the TELEPHONE KEYPAD 0~9 button where you want to store that
number. You will hear one confirmation “beep.”
6.Repeat steps 1 through 5 to store other telephone numbers.
VOL
10
