Getting Started
7.Install the HANDSET BATTERY PACK by plugging it into the BATTERY CONNECTOR inside the BATTERY COMPARMENT.
8.Place the BATTERY PACK inside the
BATTERY COMPARTMENT.
9.Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position.
10.IMPORTANT: Before initial use, charge the HANDSET for 12 hours. Place the HANDSET on the BASE UNIT and make sure that the CHARGE LED indicator on the BASE UNIT lights up and a “beep” confirmation tone is heard.
BATTERY PACK
BATTERY
COMPARTMENT
COVER
11.TONE/PULSE Select Switch:
A. If your home is equipped with a tone dialing system, set the TONE/PULSE Select Switch to the TONE position.
B. If you have a rotary dialing system, set the TONE/PULSE Select Switch to the PULSE position.
C. If you are not sure which system you have, set the TONE/PULSE Select Switch to the TONE position. Press the TALK button on the HANDSET and make a call. If the call connects, leave the switch as is; otherwise set to the PULSE position.
Belt Clip Installation
With the back of the HANDSET facing up, |
|
insert one side of the BELT CLIP HOOK into |
|
the matching slot at the top side of the |
|
HANDSET. Press down on the opposite side |
|
of the BELT CLIP until the other hook locks |
|
into the slot on the side of the HANDSET. | S |
| T |
| E |
| D |
| A |
| E |
| H |
BELT CLIP HOOK
CAUTION: The cordless telephone operates at a frequency that cause interference to nearby TVs and VCRs; the base phone should not be placed near, or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.
8
