6

Power On and Off

Note: If the terminal is powered by a NiCd battery, charge the battery fully before using the terminal.

To turn the terminal on or off, press PWR.

Battery Charging and Communications

To charge the PDT 3100’s batteries or perform communications, you have the option of using either a 31XX cradle or the 3115 Communications/Charger Adapter.

3115 Communications/Charger Adapter

The Series 3100 has an optional communications/charger adapter (CCA) that facilitates communication with a host when no cradle is available, and provides power to the terminal from

awall-mounted power supply for battery charging during terminal use and flash EPROM programming.

Battery Charging

To provide power directly to a terminal for charging the NiCd battery:

1.Plug the 10-pin RJ41 connector into the base of the Series 3100 terminal.

2.Plug the connector from the 15V power supply,

P/N 55915-00-00 (US, 115V) or 60507-00-00 (International, 230V) into the power input jack (J1) on the CCA.

Quick Reference