Application Development and Deployment 7 - 19
Incorrect disk sizes in
TCM.ini file
The total disk size specified in the script does not match the total disk size defined in
the corresponding TCM.ini section. Check if the script is corrupt or the TCM.ini has
changed after the script was created.
INVALID DIRECTORY In Script Properties window, the selected System File Path is not a valid directory.
One of the disk sizes is
one sector in size
In Script Properties window, one of the disks is too small (one sector in size). This
may cause problem while building images, especially when cushion is enabled.
Increase the disk size.
INVALID VOLUME
NAME
In Script Properties window, one of the volume labels is not valid.
Corrupt TCM.INI file!
(Invalid value of
VolumeDivisor)
The VolumeDivisor entry is missing or invalid in the TCM.ini. Reinstall TCM or
recover TCM.ini.
Invalid version of TCM
script file
The TCM script was not created by this version of TCM.
Corrupt or missing
TCM.ini file
TCM could not find TCM.ini file.
FAILED CONNECTION
TO COM PORT (Could
not get status)
While downloading images to vehicle computer, TCM failed to connect to the
selected COM port. Check if the COM port is free and is properly configured.
FAILED CONNECTION
TO TERMINAL
(Terminal Not
Connected
Properly/Terminal Not
Ready to Receive)
While downloading images, TCM failed to connect to the vehicle computer. Check if
the correct flow control protocol is selected and the vehicle computer is properly
connected and is in a listening state.
Table 7-3
TCM Error Messages (Continued)
Error Description/Solution