Symmetricom 58502A Test Equipment Required, Test Equipment Required, Table 2-1.Recommended Test Equipment

Chapter 2 Performance Tests

Test Equipment RequiredTest Equipment RequiredTable 2-1. Recommended Test Equipment

Instrument	Required Characteristics	Recommended Model	Use*
Signal Generator	Frequency Range: 100 kHz to 10 MHz	HP 8663A (or equivalent)	OV, P
	Output Level: +6 to +16 dBm
	Harmonic Distortion:<-30 dBc
	Spurious Distortion:<-80 dBc
Digitizing	Frequency range: 100 kHz to 100 MHz	HP 54600B (or equivalent)	OV
Oscilloscope
Universal Counter	Frequency Range: 100 kHz to 100	HP 53131A (or equivalent)	C (for
	MHz: >10 digits resolution @ 10 MHz		Option 010
			only)
10 MHz Reference	10 MHz Reference Signal	HP 5071A (or equivalent)	C
Source	Accuracy: ± 2 X 10-12
Terminal or computer	Communication software, RS-232	Any Model	OV, P, C
	connection
RMS Voltmeter	Accuracy: ± 2% at 3V Full Scale,	HP 3400B (or equivalent)	P
	1 MHz
50Ω BNC	_____________________________	HP 10100C (or equivalent)	OV, P, C
Feedthrough
RS-232 Interface	DTE-to-DTE 9-pin (f) to 9-pin (f)	HP 24542U (or equivalent)	C
Cable
Type N-to-BNC	_____________________________	H P 1250-0780 (or	OV, P
Connector		equivalent)
50Ω BNC Coaxial	RG-58, 12 meter, male-to-male	HP 10503A (or equivalent)	OV, P, C
Cable (2)

*C= Calibration (Option 010 only) OV = Operational Verification P = Performance Tests

2-4 User’s Guide