EN - 10 -

USING FRONT A/V INPUT JACKS

When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks
of this unit.
Then use [CHANNEL KK/LL] until “AUX” appears on the screen.
VIDEO AUDIO POWER VOLUME CHANNEL STOP/EJECT REW PLAY F.FWD REC/OTR EARPHONE
VIDEO AUDIO ex.
VCR or video camera
, etc.
[Front of the unit]
To the Audio output jack
To the Video output jack
AUX
(OUT)
(IN)
(OUT)
(IN)
TV OPERATION AND SETTINGS

WATCHING A TV PROGRAM

1Plug in the power cord
After antenna or cable connection is com-
pleted, connect the power cord into a stan-
dard AC outlet.
NOTE:
•If any digits appear in the corner of the
screen, press [POWER]without unplug-
ging the power cord.
2Turn on the unit
Press [POWER] to turn on the unit.
3Select the channel number
Use [CHANNEL KK/LL]or the Number buttonsto
select your desired channel number.
Note for using the Number buttons:
¡You must precede single-digit channel numbers
with a zero (for example: 02, 03, 04 and so on).
¡When selecting cable channels which are higher
than 99, press [+100] first, then enter the last two
digits. (Example: to select channel 125, first press
[+100] then press [2] and [5].)
4Adjust sound
Use [VOLUME XX/YY]to adjust the
volume.
Press [MUTE] to instantly mute
the sound.
Press it again to restore the previous sound level.

TO WATCH CABLE OR SATELLITE

CHANNEL

•If the unit is connected to a cable box or satellite
box, use [CHANNEL KK/LL]to select CH3 or CH4
according to the output channel setting of the
device and select desired channel on that device.

TO WATCH EXTERNAL INPUT

•When an external equipment is connected to the
front AUDIO/VIDEO input jacks, use
[CHANNEL KK/LL] repeatedly until “AUX”
appears on the screen.
VOLUME 20
C C C C C C C C C C C C
Audio cable
(commercially available)
Video cable (commercially available)