3Begin OTR
OTR(2 : 30)
Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you
SP
press the REC/OTR button. Each
additional push will increase the recording time by 30 minutes. It is set up to 8 hours.
Push(es) | Display |
| Recording length |
1 push |
| (normal recording) | |
2 pushes | 0:30 |
| 30 minutes |
3 pushes | 1:00 |
| 60 minutes |
|
|
|
|
17 pushes | 8:00 |
| 480 minutes |
|
|
|
|
TIMER RECORDING
You may set the TV/VCR to start and end a record- ing while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE: | July 6th, 2001 |
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
•If a cable box or satellite box is connected with the TV/VCR you will be limited to record only one channel. And the channel selector on the TV/VCR must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes.
•Clock must be set to the correct time and date before setting the timer.
•TV/VCR power must be turn on to program it.
•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
•The channel you want to record is properly set in advance.
Avoid over lap of programs ...
There is a chance that a program will not be record- ed. when programs overlap;
•The program with an earlier start has priority.
•Once the earliest program finishes, the overlapping programs will begin recording in sequence.
Recording Sequence
Program 1
9:00AM | 10:00AM | 11:00AM | 12:00PM |
*Recording period is SHADED
•The illustration below demonstrates the sequence of recordings.
1Select “TIMER PROGRAMMING”
Press the MENU button on the |
| – M E N U – |
| ||
remote control. | B TIMER PROGRAMMING | ||||
PICTURE CONTROL |
| ||||
Confirm “TIMER PROGRAM- | SETTING CLOCK |
| |||
CHANNEL SET UP |
| ||||
USER’S SET UP |
| ||||
MING” is pointed by pressing the |
| ||||
LANGUAGE [ENGLISH] | |||||
ZERO RETURN |
| ||||
PLAY/K button. | TIME SEARCH |
| |||
|
|
|
| ||
And press the F.FWD/B button. |
|
|
|
| |
• If you have not yet set the clock, “MANUAL |
| ||||
CLOCK SET” appears. If so, fol- | – TIMER PROGRAMMING – | ||||
low stops [3] to [8] on page 15. | |||||
CH DATE | BEGIN | END | |||
Then set the timer recording. | - - | ||||
| - - | ||||
| - - | ||||
| B - - | ||||
| - - | - - - - | - - | - - - | |
2 Select your desired program | - - | ||||
- - | |||||
- - | |||||
position (1~8) |
|
|
|
| |
Press the PLAY/K or STOP/L but- | – TIMER PROGRAMMING – | ||||
CH DATE | BEGIN | END | |||
ton to select the desired program | |||||
- - | |||||
position. | - - | ||||
- - | |||||
B 61 | |||||
Then, press the F.FWD/B button. | - - | ||||
- - | |||||
- - | |||||
| - - | ||||
3Set the channel number
Press the PLAY/K or STOP/L button until the desired channel number appears.
(Example: CH61)
Then, press the F.FWD/B button.
Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR
must be on CH3 or CH4, then the | – TIMER PROGRAMMING – | ||||
CH DATE | BEGIN END | ||||
channel to be recorded is selected | - - | ||||
- - | |||||
on the cable box or satellite box. | - - | ||||
B 61 | 7/06 FRI | ||||
- - | |||||
| |||||
| - - | ||||
| - - | ||||
| - - | - - - - | - - | - - - | |
4 Select once, every day or
weekly recording | – TIMER PROGRAMMING – | ||||
CH DATE | BEGIN END | ||||
For once recording : | - - | - - - | |||
- - | - - - | ||||
- - | - - - | ||||
| |||||
Press the PLAY/K (up) button | B 61 | EVRY DAY | |||
- - | - - - | ||||
- - | - - - | ||||
| - - | - - - | |||
| - - | - - - | |||
- 20 - |
|
|
| EN | |
