Sony STR-DA90ESG manual Center speaker delay, Rear speaker delay, Dimmer level, Control A1 display

Front Panel Operations (Remote Short-cuts: USA and Canada only)

pOTHER SETUP

Center speaker delay

Initial setting is : CENT. DELAY 0

See page 36 for details.

Rear speaker delay

Initial setting is : REAR DELAY 5

See page 36 for details.

Dimmer level

This setting lets you select brightness of the display on the front panel.

• You can select between four different settings.

Control A1 display

Initial setting is : CTRL A1 [AUTO]

This setting lets you specify the display mode for Control A1 components.

•AUTO displays “PLAY”, “STOP”, “PAUSE” or “REC” for about 8 seconds when the operation switches.

•FIX displays “PLAY”, “STOP”, “PAUSE”, “REC” or the contents of a disc or track memo of a CD or MD at all times.

•OFF turns off the operation status display.

Notes

•This setting is only effective when the IR code setting is set to Sony Control A1.

•If the disc or track memo contains a character that the receiver cannot display, “.” appears for that character.

Indexing

Using the index functions, you can specify names up to 8 characters long for each component and preset radio station.

For the on-screen operations, see page 39.

1• For the components

Turn FUNCTION to select a component.

•For the preset stations Tune in a preset station.

2Open the control panel and press DPC MODE repeatedly until the INDEX indicator lights up.

3Create a name using the digital processing control buttons.

Press Vor vto select a character, and then press b to move the cursor to the next position.

The name is stored automatically.

To insert a space, press Vor vuntil a blank space appears in the display. The space appears between " and A.

If you’ve made a mistake, press Bor brepeatedly until the character you want to change flashes. Then select the right character.

4Repeat steps 1 to 3 to assign index names to other components or stations.

zTo switch the display

Each time you press DISPLAY, the display switches between the index name ncomponent name (or frequency) ntrack memo*1) ndisc memo*1).

•If the Control-A1 display mode is set to “AUTO” or “FIX” when listening to a Control-A1 compatible tape or DAT deck, the Control-A1 operations are displayed together with the index name and component name.

Example: TAPE [PLAY] nindex name [PLAY]

*1) If the Control-A1 display mode is set to “FIX” when listening to a Control-A1 compatible CD player or MD deck, you can display the disc memo and track memo information in addition to the Control-A1 operations.

Example: CD [PLAY] nindex name [PLAY] n disc memo*2) ntrack memo*3)

*2) Up to 13 characters for CD (15 for MD).

*3) Up to 14 characters for CD (15 for MD).

Note

The display mode returns to FREQUENCY automatically when you press TUNING +/–.

55