Sony STR-DA90ESG manual Using the Remote, Inserting batteries into the remote USA and Canada

Setting Up the Remote for On-Screen Control

Using the Remote

Inserting batteries into the remote (USA and Canada)

Insert two size AA (R6) batteries with the + and – on the battery compartment. When using the remote, point it at the IR receptor on the receiver.

Turning on the receiver and bringing up the on-screen display on your TV (or monitor)

To turn on the receiver, point the remote at the IR receptor, and then press the direction control button on the remote once or twice. To bring up the on-screen display, turn on your TV and set it to the appropriate video input. If you register the IR code of your TV (see “Registering a TV (or Monitor)” on page 17), you can turn on your TV automatically whenever you turn on the receiver.

IR receptor

Inserting batteries into the remote (Australia)

1Open the cover on the

bottom of the remote.

For USA and Canada

￿

Direction

control

button ￿

	¢		¢
			¢	¢
			¢
		á	¸	¹
¢	¢	-	±
		¼	â

For Australia

Direction

control button

PUSH

ENTER

2Insert two size AA (R6) batteries with correct polarity (+/–), then close the cover.

¢

b

Notes on the remote

Battery life

Under normal use, the batteries should last for about 6 months. When the remote no longer operates the receiver, replace both batteries with new ones.

Notes

• Do not leave the remote in an extremely hot or humid

place. (continued)

•Do not use a new battery with an old one.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

15