![](/images/new-backgrounds/1038669/3866983x1.webp)
Additional Operations and Settings
Adjusting the Sensitivity of the Remote
You can select from five sensitivity levels that determine the speed at which the pointer moves.
1Click SETUP in the main menu to display the SETUP menu, then click OSD SETUP.
2Click FEELING 1 to 5 to select the sensitivity level you want.
The higher the number, the faster the speed.
OSD SETUP |
|
|
AUTO PLAY | ON | OFF |
Changing the Display Settings
Selecting the display parameters
You can select the display modes (AUTO OSD ERASE, POINTER ONLY or DEMO) and the display type (SEE- THROUGH or LANGUAGE). You can also switch the IR OUTPUT setting when you connect the IR repeater.
1Click SETUP in the main menu to display the SETUP menu, then click OSD SETUP.
2Select the display parameters you want to change.
OSD SETUP
IR OUTPUT | ON | OFF |
AUTO OSD ERASE | ON | OFF |
ON | OFF | |
LANGUAGE | ENGLISH | |
POINTER ONLY | SET | |
DEMO | START | |
FEELING | 1 2 3 4 5 | |
OSD POSITION | SET | |
RETURN |
| EXIT |
AUTO PLAY
IR OUTPUT
AUTO OSD ERASE
LANGUAGE
POINTER ONLY
DEMO
FEELING
OSD POSITION
RETURN
ON | OFF | |
ON | OFF | |
ON | OFF | |
ON | OFF | |
ENGLISH | ||
SET |
| |
START | ||
1 2 3 4 | 5 | |
SET |
| |
|
| EXIT |
•To select the display mode, click AUTO OSD ERASE (ON or OFF), POINTER ONLY (SET) or DEMO (START).
AUTO OSD ERASE: This display mode is useful during LD player operations since it allows you to see chapter numbers that otherwise might be hidden by the control panel. When this mode is on, control panels disappear whenever you click and hold down the direction control button on the remote. When you release the button, the control panel reappears.
POINTER ONLY: This display mode allows you to use the pointer to point to various
When you click POINTER ONLY SET, the on- screen display disappears except for the pointer and an EXIT button. To freeze the pointer, hold down the direction control button on the remote.
DEMO: This display mode activates a program that explains the various functions of the receiver. Note that when the program is running, it replaces previously stored data (such as surround sound parameters) with data from the program. Click START to activate the program. To stop the program, press any button on the remote or receiver.
42